International·USD
English
Start free

5 min read · 2026-11-11

A move-in and move-out inspection checklist with photos

A room-by-room move-in and move-out inspection checklist for Gulf and Egypt flats, with the photos to take so deposit questions are settled by evidence.

A good inspection is the same checklist walked twice, at move-in and at move-out, with dated photos from the same spots, so any question about damage is answered by comparing two pictures rather than two memories. Walk it with the tenant present where you can, have both sides sign, and turn every fault found into a repair job straight away instead of a note in a file.

Why inspections end in arguments

Most disputes at move-out are not about honesty; they are about missing evidence. "The stain was there when I moved in" cannot be checked if the move-in report says "carpet OK". The fix is boring and reliable: the same rooms, the same order, the same photo angles, and a short written state for each item.

Before you start

  • Use the same checklist for both visits. Print it or keep it on a phone.
  • Charge the phone and clear storage; you will take 40 to 80 photos for a two-bedroom flat.
  • Take one wide photo of each room from the door, then close-ups of anything not perfect.
  • Read meters (electricity, water, gas, chilled water where billed separately) and photograph them.
  • Count keys, access cards, parking tags and remotes.

The room-by-room checklist

Write for each item: Good, Fair (normal wear), or Damaged, with a note.

AreaCheckPhoto
EntranceDoor, lock, peephole, bell, intercomDoor outside and inside
Living roomWalls, ceiling, floor, windows, curtains or blinds, sockets, lightsWide shot, plus each mark
KitchenCabinets, worktop, sink and taps (run them), hob, oven, extractor, fridge, washing machineInside oven and fridge
BathroomsToilet flush, taps, shower, drain speed, silicone, extractor fan, water heaterUnder the sink
BedroomsWardrobes, doors, walls, floors, ACWardrobe open
AC unitsRunning, cooling, no drips, filter state, remote presentEach indoor unit
BalconyFloor, drain, railing, door sealDrain close-up
SafetySmoke detector present, fire blanket or extinguisher if suppliedEach device
MetersReadingsEach meter
Keys and cardsNumber of eachAll laid out together

Gulf and Egypt specifics worth adding: AC drain trays and lines (summer leaks start here), water heater age and leaks, balcony drains blocked by sand, and window seals where dust gets in.

At move-out

  1. Walk the same order with the move-in report in hand.
  2. Photograph from the same angles.
  3. Mark each item: same as move-in, normal wear, or new damage.
  4. Agree what is normal wear (faded paint, light marks) versus damage (holes, broken fittings, burns). Local rules and the tenancy contract decide what can be charged; check the rule for your emirate or country.
  5. Both sides sign, with the date.

Turn the faults into jobs, not notes

The weakest point of most inspections is what happens after. "Tap drips" written on a report at move-out often waits until the next tenant reports it in their first week.

In UnitVO, the inspector scans the unit's QR sticker and reports each fault with a photo, or a signed-in manager adds it as a new request for that unit; either way it becomes a job for that unit and goes to the right technician through dispatch. The technician works from their phone's browser, adds before and after photos and the parts used, and the job stays in the unit's history. The next resident reports from the same sticker. Moving a new resident in? The new resident welcome pack lists what to tell them. See the technician app and QR codes.

The residents directory keeps who lives in each unit with move-in and stay dates. Managers see contact details; technicians and housekeepers see a first name and the unit only.

Holiday homes and serviced apartments

Between guests, a full inspection is too slow; use a short turnover check instead and keep the full inspection for owner handovers or long stays. Our turnover checklist covers the between-guests version, and for a flat handed over new by the developer, use the snagging checklist.

When this is not for you

If you need a signed legal inspection report in a specific government format, use that format; this checklist helps you fill it but does not replace it. If you manage two or three flats yourself and repair everything personally, a printed checklist and your phone's camera may be all you need, and the free plan's 5 units would cover a tool if you want one later. Deposits are settled under your tenancy contract and through your own accounts. Read who UnitVO is not for.

What it costs

In the International region: Free (5 units, USD 0), Pro USD 49, Team USD 75 and Portfolio USD 199 a month, billed yearly. Each region has its own price list in its own currency; prices are before tax, and UAE customers pay 5 % VAT at checkout. Every plan has every feature, and the 30-day trial (Team features, up to 50 units) needs no card. See pricing.

Questions and answers

How many photos should a move-in inspection have?

Enough for one wide shot per room plus a close-up of every mark, meter and device; for a two-bedroom flat that is often 40 to 80.

Should the tenant be present?

Where possible, yes. Walking it together and both signing at the end prevents most later disputes.

What counts as normal wear?

Usually light marks, faded paint and worn carpet from normal use. The tenancy contract and local rules decide what can be charged, so check them.

What happens to faults found during the inspection?

In UnitVO each one is reported from the unit's QR sticker with a photo and becomes a job for that unit, so it can be fixed before the next tenant moves in.

Add UnitVO as a preferred source on Google

All guides