International·USD
English
Start free

5 min read · 2026-11-11

Maintenance for a mixed-use building: flats above, shops below

Running maintenance where flats sit above shops and restaurants: grease, smells, shared risers, access hours, who pays, a checklist and first replies.

A building with flats above and shops or restaurants below has two sets of users with opposite needs: residents want quiet, clean air and dry ceilings; tenants below want access for deliveries, long opening hours and kitchens that run all day. Most problems sit where the two meet: grease in shared drains, kitchen smells in the risers, leaks from flats into shop ceilings, and arguments about who pays. A plan that works separates the two sides' areas and rounds, watches the shared systems closely, and records every fault with who caused it and who pays.

The fault lines

WhereWhat goes wrongWho usually pays (check the leases)
Shared drainsGrease from restaurants blocks the stack; backflow and smellsThe tenant whose grease trap failed, often
Kitchen extractionSmells and smoke reach flats; ducts drip greaseThe restaurant tenant for its duct; the building for shared shafts
Ceilings of shopsLeaks from flats aboveThe flat owner or the building, by cause
Bin areasFood waste from restaurants, smell, pestsOften shared; set the rules in writing
Loading and car parkDeliveries block residents' accessHouse rules
AC and plant on the roofShop units add outdoor units and loadsBy lease

Leases and the building's rules decide who pays. Your job is to record the cause well enough that the decision is easy.

When it goes wrong most

TimeWhy
SummerBin smells, kitchen extraction working hardest, AC loads high
Ramadan eveningsRestaurants at full capacity late; bins and grease peak
Shop fit-outsDust, noise, new drains and ducts connected to shared systems
WeekendsCar-park and loading conflicts

The checklist

Daily

  • Bin areas: restaurant waste collected; doors closed; floor washed.
  • Shared drains and manholes near restaurants: no smell or overflow.
  • Loading area clear by the agreed time; residents' parking not blocked.
  • Shop fronts and arcades: lights, floor, nothing blocking exits.

Weekly

  • Grease traps: each restaurant's emptying record seen (ask for it).
  • Kitchen extraction outlets at roof level: no drips, no smoke staining the facade (look only).
  • Shop ceilings below wet areas of flats: no stains.
  • Residents' entrance kept separate and clean.

Monthly

  • Every tenant's fit-out or change in progress checked against what was approved.
  • Shared risers: no new unapproved pipes or cables.
  • Common-area equipment checked against its record.

Yearly

  • Kitchen exhaust duct cleaning, by each restaurant's specialist contractor; keep copies of the certificates.
  • Fire systems in both parts, by the licensed provider under your authority's rules.
  • Drain stack jetting where restaurants connect (the plumbing checklist covers the rest of the water side).

Who does what

TaskBuilding teamTenant / their contractorLicensed specialist
Rounds, logging, photosYes
Grease trap emptyingCheck recordsYes
Kitchen exhaust ductsLook and logSpecialist cleaner
Kitchen fire suppressionLook and logLicensed fire provider
Shared drain blockagesFirst responseCost by causeDrain contractor
Gas to restaurantsNeverGas company

Two lists in one building

Keep residential and commercial areas apart in your records so the costs and the reports stay apart. In UnitVO, each part can be set up as its own property under one account, with its own rounds and its own spending limit. See several properties. Residents and shop staff report from the QR sticker at their unit or in the area, with no app.

What to photograph and log

  • The cause of every leak or blockage, before cleaning up: grease in a manhole, a flat's burst hose.
  • Tenants' grease trap and duct cleaning records.
  • Fit-out work before it is closed up.
  • Damage from deliveries.

Building rounds keep the photo and the time with each point, and a Not OK becomes a job. Contractor quotes for repairs go to the owner through a link and wait for approval above the limit you set: see quotes and owner reports.

Requests and first replies

FromRequestFirst reply
Resident"Restaurant smell in my flat""Sorry. Which room and what time? We're checking the extraction and the shaft today."
Resident"Deliveries block the car park""Thanks; we're reminding the shops of the delivery hours and checking now."
Shop"Water dripping from our ceiling""We're going to the flat above now. Please move stock away and send a photo."
Shop"Our drain is backing up""We're sending the drain contractor. Please stop using the sinks for now."
Resident"Rats near the bins""We're informing pest control today and checking the bin area." (pest control checklist)

Budgeting time

Plan two rounds, not one: residential areas in the morning, commercial areas after closing or before opening. Count grease and drain jobs per month by tenant; if one tenant keeps causing them, raise it under the lease instead of paying for more call-outs.

The mistakes that cost the most

  • No record of cause. Without it, the building pays for tenants' grease.
  • Fit-outs connected to shared systems unchecked. The problem appears a year later.
  • One report for owners of flats and owners of shops. They care about different numbers.

When this is not for you

If shops and flats are run by separate managers with separate systems, each may only need its own tool. UnitVO lists plans up to 300 units. Read who UnitVO is not for.

Questions and answers

Who pays when a restaurant's grease blocks the building drain?

It depends on the lease and the building's rules. Record the cause with photos so the decision is clear.

Should residential and retail areas have separate rounds?

Yes. Different hours, different risks, and separate costs for different owners.

Can shops report problems the same way residents do?

Yes, from a QR sticker at their unit, with no app.

Can one account cover both parts of the building?

Yes: each part can be its own property with its own rounds and limits. See pricing.

Add UnitVO as a preferred source on Google

All guides