6 min read · 2026-11-11
A preventive maintenance calendar for the Gulf summer
A month-by-month preventive maintenance calendar for Gulf buildings: AC, pumps, water tanks and generators before, during and after the summer peak.
The Gulf summer is won in March and April: service every AC, pump and generator before the heat arrives, then switch to short weekly checks from June to September, when a failure means an unbearable flat within hours. The calendar below spreads the work across the year so your technicians are not doing a whole tower's AC service in the same week the complaints start.
Why the calendar matters more here
In a hot, humid summer, the same few machines carry the building: split and central AC units, chilled water or package units, booster pumps, water tanks and, where there is one, the backup generator. When they fail in July, the repair is slower (contractors are busy, parts run short) and the cost is higher (overtime, water damage from blocked drain lines, residents moving to hotels). Most of those failures give warning: dirty filters, blocked drains, rising pump noise, a generator that has not run under load for months.
Month-by-month calendar
Adapt the months to your city: coastal cities stay humid longer; inland areas peak hotter and drier. Follow the manufacturer's service intervals and your contracts where they differ.
| Month | AC | Pumps and water | Generator and power | Building |
|---|---|---|---|---|
| January | Plan the spring service; order filters and drain tablets | Check pump room for leaks and noise | Monthly run test | Roof drains before winter rain |
| February | Start unit-by-unit service in empty and easy-access flats | Inspect tank lids, vents and access locks | Monthly run test | Check waterproofing after rain |
| March | Main service push: filters, coils, drain lines, refrigerant checks by a qualified technician | Tank cleaning booked if due (see your local rule) | Load test before summer | Shade and seal roof equipment |
| April | Finish the service; list units that failed checks for repair | Booster pump service; spare seals in stock | Fuel, batteries, coolant | Window and door seals |
| May | Re-check units that needed repair; clean condensate trays | Check pressure in top floors | Monthly run test | Common-area AC set-points agreed |
| June | Weekly filter check in common areas; respond to "not cooling" as high priority | Weekly pump room round | Monthly run test | Car park ventilation |
| July | Weekly checks continue; track repeat callers | Watch tank temperatures and levels | Monthly run test | Lift machine room cooling |
| August | Weekly checks; plan next year's replacements from repeat repairs | Weekly round | Monthly run test | Humidity and mould spots in stairwells |
| September | Second filter cleaning across flats | Check for leaks after the peak | Monthly run test | Repaint rust spots on roof steel |
| October | Review the summer: which units failed, which contractor came back | Tank cleaning if your interval is six months | Load test | Prepare for the rain season |
| November | Replace units flagged for replacement while demand is low | Pump spares restocked | Monthly run test | Roof drains cleared |
| December | Budget next year's service with the owner or association | Annual valve exercise | Annual service | Year-end walk of all plant rooms |
Water tank cleaning intervals, generator inspections and fire system checks are set by local rules and contracts, which differ between emirates and countries. Check what applies to your building and keep the certificates. For the detail behind each column, see the air conditioning checklist and the generator checklist.
Put the calendar into rounds and records
A calendar on the wall does not prove anything was done. Three habits make it real:
- Register the machines once. In UnitVO's equipment register, each AC, pump or generator gets its model, location and warranty date, and a QR code on the machine. Scanning it shows the last five jobs on that machine.
- Turn the monthly lines into rounds. Building rounds run daily, weekly or monthly per building, each with its own checklist. Points can require a photo, and the round cannot be finished without it. Anything marked Not OK becomes a maintenance job straight away.
- Read the repeat repairs in August. A machine that needs a third repair within 60 days is flagged. That list is next year's replacement budget; see repeat repairs and how to build an annual maintenance budget.
If you track all of this in a sheet today, UnitVO vs spreadsheets shows what changes, and your sheet can be imported.
A summer week for a small team
From June to September, a fixed weekly rhythm keeps planned checks from being swallowed by call-outs:
- Sunday or Monday: weekly pump room and tank round; common-area AC filters.
- Midweek: follow up last week's repeat callers before they call again.
- Thursday: generator or backup power run, if you have one; stock check of filters, drain tablets and pump seals.
- Every day: "not cooling" in an occupied flat handled as high priority, not normal.
When this is not for you
If your building's plant is run by a facilities management contractor under a full contract, use this calendar to check their work, not to do it twice. Licensed work (refrigerant, gas, fire systems, lifts, electrical panels) must be done by the people your local rules name. And if you need a planned maintenance tool with automatic recurring work orders for hundreds of assets, check that this fits before you move: UnitVO's strength is requests, rounds and the equipment history. Read who UnitVO is not for.
What it costs
Every plan includes the equipment register and rounds. In the International region: Free (5 units, USD 0), Pro USD 49, Team USD 75 and Portfolio USD 199 a month, billed yearly. Each region has its own price list in its own currency; prices are before tax, and UAE customers pay 5 % VAT at checkout. The 30-day trial has Team features for up to 50 units and needs no card. See pricing.
Questions and answers
When should AC service start in the Gulf?
Plan it in January and do most of it in February to April, so units are ready before the heat and repairs are finished by May.
How often should common-area AC filters be checked in summer?
Weekly from June to September is a common habit, because dust and humidity block them faster; follow the manufacturer where it says otherwise.
How do I prove the service was done?
Make it a round with required photos, or a job filed against the machine's QR code, so each check has a time, a person and a picture.
How often should water tanks be cleaned?
It depends on local rules, which differ by emirate and country. Check the rule for your building and keep the cleaning certificate.