6 min read · 2026-11-11
Electrical maintenance checklist: safe checks and where to stop
What a building team can safely check on lighting, sockets and boards, what only a licensed electrician may touch, what to log, and replies to power calls.
Electrical work in a building splits sharply: anyone on the team can report a dark corridor or a cracked socket cover, a trained handyman can change lamps with the circuit switched off, and everything inside distribution boards, main panels, transformer rooms and generators belongs to a licensed electrician or the utility. A good checklist keeps your team on the right side of that line, catches heat and damage early, and records every trip and outage so patterns show. This post gives you that checklist, the safety rules, and replies to the "power is off" call.
Start with the stop rules
Before the checklist, the rules every person on your team should know by heart:
- Never open a distribution board, main panel or meter room cover unless you are the licensed electrician.
- Never work on anything live. Lamp changes happen with the circuit switched off, by someone trained to do it; fittings, sockets and wiring are the electrician's.
- Water and electricity together is an emergency. Keep people away, don't touch, call the duty manager.
- Smell of burning, buzzing, scorch marks or warm covers: stop. Keep people back and call the licensed electrician.
- High voltage and transformer rooms are for the utility or its contractor only.
What fails, and when
| Season or event | What you see | Usual cause |
|---|---|---|
| June to September | Breakers tripping in flats, warm boards | AC units at full load on old circuits |
| After rain or washing | Earth-leakage trips, outdoor lights out | Water in outdoor fittings and sockets |
| Move-in weeks | Overloaded sockets, extension leads | New appliances, kitchens fitted without checks |
| Any time | Corridor and car-park lights out | Lamps, drivers, timers or photocells |
| Power cuts | Lifts stopped, pumps off, gates stuck | Supply loss; generator changeover where there is one (see the generator checklist) |
The checklist
Daily (on the round)
- Corridor, stair, lobby and car-park lighting: note every dark fitting with its location.
- Outside lights on at dusk; timers and photocells working.
- Electrical rooms: door locked, nothing stored against them, no smell, no noise, no heat felt at the door.
Weekly
- Socket and switch covers in common areas: no cracks or burn marks.
- Outdoor fittings and sockets: covers closed, no water inside.
- Emergency lighting: lit on a quick look.
Monthly
- A look at the meter room and riser cupboards from the door: tidy, labelled, no signs of heat.
- Every trip and outage of the month reviewed: same flat, same circuit, same time of day?
- Extension leads and adapters in staff areas and guard rooms: removed or replaced with proper sockets.
Yearly, by the licensed electrician
- Inspection and testing of boards and circuits, including earth-leakage devices, on the schedule your rules set.
- Thermal check of main panels where your contract includes it.
- Earthing check, and anything the authority's rules ask for.
Who does what
| Task | Anyone on the team | Trained handyman, circuit off | Licensed electrician / utility |
|---|---|---|---|
| Report dark lights, broken covers | Yes | ||
| Change lamps | Yes | ||
| A tripped breaker in a flat | Follow the building's electrical safety rule; report it | Yes, if it trips again or anything smells of burning | |
| Fittings, any work in a board | Yes | ||
| New sockets and circuits | Yes | ||
| Main panels, transformers, generators | Yes |
What to photograph and log
- Every dark fitting, with its place: the photo saves the electrician a second trip.
- Burn marks or damage, before anyone touches them.
- Each trip in a flat: date, time, what was running.
- The electrician's test reports, with the date.
On UnitVO's building rounds, lighting and electrical-room points can need a photo, and a Not OK becomes a job straight away. Dispatch offers electrical jobs only to someone who holds the skill with a valid certificate; when no electrician is on shift, the manager can send a contractor a link. Boards and panels can sit in the equipment register with their own history.
Requests and first replies
| Resident says | First reply |
|---|---|
| "No power in my flat" | "Is the whole flat off, or part of it? Are the neighbours off too? We're checking now." |
| "Breaker keeps tripping" | "Please don't reset it again. Unplug what was running and we'll send an electrician." |
| "Socket is burnt / sparking" | "Don't touch or use it, and keep people away from it. We're sending a licensed electrician." |
| "Water dripping near the lights" | "Please keep away and don't touch the switch. We're alerting the duty manager now." |
| "Corridor light out" | "Thanks, we've logged it for today." |
"Water near a socket" is one of the danger words UnitVO checks by fixed rules: the request is marked urgent, the duty manager is alerted, and the resident sees the local emergency numbers. See urgent incidents.
Budgeting time
Lighting is the bulk of in-house electrical work: count fittings per floor and plan a monthly lamp round rather than one-by-one call-outs. Book licensed electrician time in blocks, with a list of logged faults ready, so one visit clears many; night call-outs follow the after-hours on-call plan.
The mistakes that cost the most
- Resetting the same breaker every day. A breaker that trips again is warning you: call the electrician.
- Storage in electrical rooms. Boxes and cleaning chemicals next to panels are a fire waiting to happen.
- No log of trips. Without dates and circuits, the electrician starts from nothing every time.
When this is not for you
If your electrical systems are managed under a facilities contract with its own fault reporting, you may only need their reports. UnitVO records faults and jobs; it doesn't test or certify installations. Read who UnitVO is not for.
Questions and answers
Can a maintenance technician work inside a distribution board?
Only if they are a licensed electrician. Everyone else reports and keeps people away.
What should we do when a breaker trips?
Follow the building's own electrical safety rule. If it trips again, or anything smells of burning, leave it off and call the electrician.
Why do breakers trip more in summer?
AC units run at full load for hours, and older circuits or loose connections heat up. Repeated summer trips are a job for the electrician.
Can UnitVO send electrical jobs only to qualified people?
Yes. Dispatch offers a job only to someone who holds that skill with a valid certificate. See pricing.