5 min read · 2026-10-20
The turnover checklist that gets apartments ready by 15:00
A practical turnover checklist for serviced apartments and holiday homes, and the four checks that decide whether a unit is really ready.
Check-out at 11:00, check-in at 15:00. Four hours sounds generous until the cleaner is stuck in traffic, the kettle is broken and the supervisor is at another building. Then the guest arrives to a unit that is “nearly ready”.
The fix is not working faster. It is knowing early which units are at risk, and why.
Ready means four things
A unit is ready for the next guest only when four things are true at once:
- Booked as expected — the stay is confirmed and the previous guest has really left.
- Clean — cleaned and inspected, not just cleaned.
- Safe to use — no open job that affects safety or comfort: a shower drain, a broken lock, a dead AC.
- Accessible — keys, cards or codes ready for the arriving guest.
If any one is missing, the unit is not ready. It is either at risk (it can still make it) or blocked (it can’t without someone deciding something). Write the reason and the person who owns it next to every unit that isn’t ready.
A checklist that catches problems, not just dust
A turnover checklist should be short enough to finish and specific enough to catch what guests complain about. A good starting point for a one-bedroom:
- Bed linen and towels changed; spare set in the cupboard
- Bathroom cleaned; shower drains quickly; no hair in the drain
- Kitchen: kettle, hob and fridge work; dishes clean and complete
- AC runs and cools in every room; remote has batteries
- Wi-Fi works; the password card is in place
- Photo of the living room and the bedroom from the door
- Welcome pack and the QR code for requests in their place
Notice the items that test something rather than clean something: the kettle, the drain, the AC, the Wi-Fi. These are what turn into a 15:30 phone call. When one fails, it should become a small maintenance job at once — not a note someone reads tomorrow.
Times that work backwards from the arrival
For each turnover, write down the latest time it can start and still be ready. If cleaning takes 90 minutes and inspection 20, a 15:00 arrival needs cleaning to start by 12:40 at the latest. At 12:41 that unit is at risk, and someone should know.
Inspect before you call it ready
The person who cleaned should not be the one who signs it off. A quick inspection with the same checklist and two photos catches most misses. In small teams the supervisor can inspect several units in one round if the turnovers are planned in a sensible order.
Early check-in and late check-out
Say yes only when the next stay and the team allow it. A late check-out until 13:00 moves the latest cleaning start too. Decide it with the board in front of you, not from memory.
How UnitVO does this
In UnitVO, the housekeeping board puts check-outs with an arrival behind them first, a housekeeper reports a defect in one tap and it becomes a job for the technician, and room readiness shows every unit as ready, at risk or blocked with the reason and the owner. See housekeeping and room readiness, or start the free trial.